Installation of the Vista and XP drivers

SAVE OFFLINE

HiPath 1100 and 1200 Installation of Vista/XP

SEN SME MP 3 Ausgabe: Datum: Status:

0.1 20.06.2008 preliminary

© Siemens Enterprise Communications GmbH&Co.KG 2008 Herausgegeben von Siemens Enterprise Communications (SEN) Hofmannstraße 51 D-81359 München

SEN SME MP Installation of Vista/XP

HiPath 1100 and 1200

Contents 1

Installation of the new Vista/XP drivers ......................................................1 1.1 1.2 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5 1.2.6 1.3 1.3.1 1.3.2 1.4

Do not connect USB plug!.........................................................................................1 HiPath 1200 Installation CD (very similar to HiPath 1100) .....................................1 Install USB Drivers .......................................................................................................1 XP or Vista ...................................................................................................................1 Administration is sufficient unless CAPI is necessary for PC Fax or Internet access through the HiPath .......................................................................................................2 Two times „Continue“ ...................................................................................................2 Driver installation completed ........................................................................................3 Exit CD menu ...............................................................................................................3 USB plugged...............................................................................................................3 Automatic Installation of the ISDN device driver..........................................................4 Automatic Installation of the CDC device driver...........................................................5 Completed!..................................................................................................................6

I

24.06.2008

SEN SME MP Installation of Vista/XP

HiPath 1100 and 1200

History of Change Version

Date

Author

Changes

0.1

20.06.2008

Zacharski

Initial Creation

II

24.06.2008

SEN SME MP Installation of Vista/XP

HiPath 1100 and 1200

1

Installation of the new Vista/XP drivers

1.1

Do not connect USB plug!

USB to the optiPoint phone is not plugged in!

1.2

HiPath 1200 Installation CD (very similar to HiPath 1100)

Start HiPath 1100/1200 System CD. Only the menu design is different.

1.2.1

Install USB Drivers

1.2.2

XP or Vista

Page 1

24.06.2008

SEN SME MP Installation of Vista/XP

HiPath 1100 and 1200

1.2.3

Administration is sufficient unless CAPI is necessary for PC Fax or Internet access through the HiPath 1100/1200

1.2.4

Two times „Continue“

Softwareinstallation press Continue Hardwareinstallation press Continue

Page 2

24.06.2008

SEN SME MP Installation of Vista/XP

HiPath 1100 and 1200

1.2.5

Driver installation completed

1.2.6

Exit CD menu

1.3

Plug-in USB

Now please connect the USB plug from the optiPoint 500 to your PC

Page 3

24.06.2008

SEN SME MP Installation of Vista/XP

1.3.1

HiPath 1100 and 1200

Automatic Installation of the ISDN device driver

(This activity may take some minutes)

Page 4

24.06.2008

SEN SME MP Installation of Vista/XP

1.3.2

HiPath 1100 and 1200

Automatic Installation of the CDC device driver

(This activity may take some minutes)

Page 5

24.06.2008

SEN SME MP Installation of Vista/XP

1.4

HiPath 1100 and 1200

Completed!

Test the connection e.g. by starting the HiPath 1100/1200 Manager.

Page 6

24.06.2008